3 arrows

Get a Free AWS Exam retake using promo code DOUBLESHOT

closeClose

CIERS1 – Cisco Expert-Level Training for CCIE Routing and Switching v5.0

  • Tuition USD $4,595
  • Reviews star_rate star_rate star_rate star_rate star_half 4841 Ratings
  • Course Code 5098
  • Duration 5 days
  • Available Formats Classroom
This course includes Cisco Training Exclusives

This intensive Boot Camp-style course is designed to help CCIE Routing & Switching candidates determine exactly where they are in their process of preparing for the CCIE R&S v5.0 practical exam and to fill technology gaps through lecture and labs.

The class is approximately 60% lecture and 40% hands-on labs, with extended hours of up to 13 hours per day. Upon completion of the technology lecture that includes best practices for applying and troubleshooting the technology, you will complete labs based on that technology. At the end of the class, you will perform two graded CCIE-level practice labs: a troubleshooting lab and a configuration lab.

Additionally, you will learn how to develop study plans and how to develop and use checklists and decision diagrams to formulate the mindset needed to pass the CCIE lab. With this information stored in your online portal, you can review the material covered in the CIERS1 class as frequently as you wish.

The Cisco 360 program has exclusive rights to run all labs on top of IOS over Linux (IOL). These are the same servers, same look and feel as the actual lab.

Note: To participate in this course and access your Cisco 360 portal and remote labs, it is highly recommended that you bring the laptop associated with your Cisco 360 Learning Program for CCIE account.

Skills Gained

  • Configuration and Troubleshooting of:
    • Dynamic Multipoint VPN (DMVPN)
    • Layer 2 concepts including Switches, HDLC and PPP
    • Open Shortest Path First (OSPF) for IPv4 and IPv6
    • Enhanced Interior Gateway Routing Protocol (EIGRP) for IPv4 and IPv6
    • Routing Information Protocol (RIP) v2
  • IGP Route Redistribution
  • Controlling IGP Updates with Route Maps and Distribute Lists
  • BGP-4 Neighbor Relationships (including Route Reflectors and Confederations) for IPv4 and IPv6
  • Filtering BGP Updates using Prefix Lists, AS Path Access Lists, Communities, and Route Maps
  • Border Gateway Protocol (BGP) Attribute Manipulation
  • Multiprotocol Label Switching and Layer 3 VPN
  • Router QOS
  • IP Multicast Routing using PIM Sparse and Dense Modes
  • Network Services including Network Address Translation (NAT), Dynamic Host Configuration Protocol (DHCP), First Hop Redundancy Protocols, Network Time Protocols
  • Network Troubleshooting methodologies and techniques

Who Can Benefit

Candidates for the CCIE Routing & Switching practical exam who are three to six months out from the date.

Note: This course, like all courses, is provided only to individuals sponsored by an employer (business, government agency, non-profit, etc.). Fee-paying members of the general public are not permitted to register. For more information, please contact us at 1-866-716-668.

Prerequisites

  • CCIE Routing and Switching candidates are expected to have an in-depth understanding of the topics in the exam blueprints and are strongly encouraged to have three to five years of job experience before attempting certification
  • CCNP Routing and Switching or equivalent job experience
  • Passing score on CCIE Routing and Switchinng written exam #350-001

Course Details

Lab 1: Performance Assessment Lab 1 (360RSW05-LAB-GA01) (6-hour assessed lab)

Lab 2: BGP (intermediate to advanced topics)

Lab 3: MPLS

Lab 4: IP Multicast: Dense Mode

Lab 5: IP Multicast: Sparse Mode

Lab 6: QoS (includes MQC on routers and switches and Catalyst QoS)

Lab 7: Network Services

Lab 7: Performance Assessment Lab 2 (360RSW05-LAB-GA02 Troubleshooting Section) (3.5-hour assessed troubleshooting lab)

Lab 8: Performance Assessment Lab 2 (360RSW05-LAB-GA02 Configuration Section) (Six-hour assessed lab)

2015-10-15 08:16:33.383000000

10. MPLS and Layer 3 VPN

11. IP Multicasting

  • DENSE Mode
  • SPARSE Mode
  • Attaining Universal Multicast Connectivity
  • IANA Reserved Multicast Addresses

12. Quality of Service

  • Deploying Quality of Service on a Cisco Network
  • QoS Simulation

13. Network Services - NTP, NAT, DHCP and FHRP

14. 3-Hour Assessed Troubleshooting Lab (Part 1 - 360RSW05-LAB-GA02)

  • 11 Incidents (Trouble Tickets)

15. Six-Hour Configuration Assessed Lab (Part 2 - 360RSW05-LAB-GA02)

  • DMVPN and Serial Communications
  • Switch Configuration
  • IPv4 OSPF
  • IPv4 EIGRP
  • IPv4 RIP
  • BGP
  • IPv6 Routing
  • Security
  • QoS
  • DHCP
  • Address Administration
  • Gateway Redundancy
  • Multicast
  • MPLS

Lab 1: Performance Assessment Lab 1 (360RSW05-LAB-GA01) (6-hour assessed lab)

Lab 2: BGP (intermediate to advanced topics)

Lab 3: MPLS

Lab 4: IP Multicast: Dense Mode

Lab 5: IP Multicast: Sparse Mode

Lab 6: QoS (includes MQC on routers and switches and Catalyst QoS)

Lab 7: Network Services

Lab 7: Performance Assessment Lab 2 (360RSW05-LAB-GA02 Troubleshooting Section) (3.5-hour assessed troubleshooting lab)

Lab 8: Performance Assessment Lab 2 (360RSW05-LAB-GA02 Configuration Section) (Six-hour assessed lab)

When does class start/end?

Classes begin promptly at 9:00 am, and typically end at 5:00 pm.

Does the course schedule include a Lunchbreak?

Lunch is normally an hour long and begins at noon. Coffee, tea, hot chocolate and juice are available all day in the kitchen. Fruit, muffins and bagels are served each morning. There are numerous restaurants near each of our centers, and some popular ones are indicated on the Area Map in the Student Welcome Handbooks - these can be picked up in the lobby or requested from one of our ExitCertified staff.

How can someone reach me during class?

If someone should need to contact you while you are in class, please have them call the center telephone number and leave a message with the receptionist.

What languages are used to deliver training?

Most courses are conducted in English, unless otherwise specified. Some courses will have the word "FRENCH" marked in red beside the scheduled date(s) indicating the language of instruction.

What does GTR stand for?

GTR stands for Guaranteed to Run; if you see a course with this status, it means this event is confirmed to run. View our GTR page to see our full list of Guaranteed to Run courses.

Does ExitCertified deliver group training?

Yes, we provide training for groups, individuals and private on sites. View our group training page for more information.

Does ExitCertified deliver group training?

Yes, we provide training for groups, individuals, and private on sites. View our group training page for more information.

What does vendor-authorized training mean?

As a vendor-authorized training partner, we offer a curriculum that our partners have vetted. We use the same course materials and facilitate the same labs as our vendor-delivered training. These courses are considered the gold standard and, as such, are priced accordingly.

Is the training too basic, or will you go deep into technology?

It depends on your requirements, your role in your company, and your depth of knowledge. The good news about many of our learning paths, you can start from the fundamentals to highly specialized training.

How up-to-date are your courses and support materials?

We continuously work with our vendors to evaluate and refresh course material to reflect the latest training courses and best practices.

Are your instructors seasoned trainers who have deep knowledge of the training topic?

ExitCertified instructors have an average of 27 years of practical IT experience. They have also served as consultants for an average of 15 years. To stay up to date, instructors will at least spend 25 percent of their time learning new emerging technologies and courses.

Do you provide hands-on training and exercises in an actual lab environment?

Lab access is dependent on the vendor and the type of training you sign up for. However, many of our top vendors will provide lab access to students to test and practice. The course description will specify lab access.

Will you customize the training for our company’s specific needs and goals?

We will work with you to identify training needs and areas of growth.  We offer a variety of training methods, such as private group training, on-site of your choice, and virtually. We provide courses and certifications that are aligned with your business goals.

How do I get started with certification?

Getting started on a certification pathway depends on your goals and the vendor you choose to get certified in. Many vendors offer entry-level IT certification to advanced IT certification that can boost your career. To get access to certification vouchers and discounts, please contact Edu_customerexperience@techdata.com

Will I get access to content after I complete a course?

You will get access to the PDF of course books and guides, but access to the recording and slides will depend on the vendor and type of training you receive.

vary good online learning. instructor is vary good the way he explained every thing.

This was a good program to get prepared for the solutions architect associate exam.

Concise and good to follow along. Although it is a lot to take in under a short period of time.

Thank you for training on AWS development. Course was good and encouraging but labs need to be improved and provide more information and ask students to more work than provide solutions.

Great and very intuitive. Better than the traditional hit the wrong button/lose points.

0 options available

There are currently no scheduled dates for this course. If you are interested in this course, request a course date with the links above. We can also contact you when the course is scheduled in your area.

Contact Us 1-800-803-3948
Contact Us
FAQ Get immediate answers to our most frequently asked qestions. View FAQs arrow_forward